Driver side started but I was froze out

I ran out of the F7 polish, so I had to buy some more. I decided to try the G6 polish in addition to the F7. The G6 is definitely more aggressive. I like it! It cuts much faster. I guess you live and learn. The G6 leaves a tremendous amount of swirl marks. They don't show up until you shine a light on it at an angle. I am now polishing in the warehouse because outside it is too cold and it gets dark too fast. The swirl marks come out easy with the F7 and the cyclo. I have about 3/4 of the street side compounded and one small section cycloed. It is getting too cold to polish at this point. It just is taking too long to get the metal up to temperature. What I have discovered is that you need to actually heat the metal up at some degree to get the metal to "melt" and bring out the shine. Here are some pictures of the swirl marks. See if you can find what section was cyloed. I'm done with polishing in 2009. I will have to wait till the spring to continue and finish up the shine.