I've got gas.

A truer statement has never been made. I always have gas, but now my Airstream has gas. I plumbed the new copper lines from front to back tonight for the Liquid Propane. I saved all the old fittings, but used all new lines. I could not find new fittings that had the same configurations, so I reused the old ones. Not to mention, new propane fittings are extremely expensive. The old shutoff valves are about $30+ each. I chose to scrap them and use new ball valves. I have a 5/8 line that runs from the two 40lb tanks in front to just behind the door. At this point, it splits off to 3/8" lines that go to the appliances. I will need gas for the furnace, fridge, water heater and stove. I needed to purchase a new flaring tool to make all the connections. The larger lines have a single flare, and all the smaller lines I used a double flare to make up the connections. I also polished up the panel next to the water heater so I could install the new Marinco Stainless Steel power inlet.

Shitters full!`

I had one goal since last year. It was to have the Airstream done by our annual camping trip to Huston Woods for the Halloween camping weekend. Well, the summer filled up fast, and the fall filled up even faster. I am now coaching 2 soccer teams for each of my kids. With 2 teams and multiple practices for each, I have not had time to even take a dump. So to get the Airstream to Huston Woods, the boss told me we could take it if it had a working toilet. I finished the toilet installation and now we can go camping. It was not as easy as screwing down the toilet to the floor. I had to have a floor for the bathroom installed first. I purchased a floating vinyl floor from Home Depot. It is a speckled brown color. It is actually marketed as a garage floor vinyl. It was easy to install. All I had to do was to cut out the holes for the dump valves and the toilet. The other thing I needed to do was to install the water pump and some plumbing to get water to the toilet. Everything worked and we finally went on our first of many camping trips with the Airstream.

Time to paint the tub.

I pulled the bathroom out of the camper so long ago that I forgot what it even looks like. After much research, I decided to use a 2 part urethane primer and a top coat. It is the same stuff that is used on car bumpers. I chose a gloss white color to match the porcelain toilet. The toughest part of this paint job was removing the stupid brown flower stick on things that give you traction in the tub . Since the tub is ABS, I could not use lacquer thinner to remove the stickers and adhesive. I ended up sanding the things down to the plastic to get rid of the stickers. The primer and paint went down pretty smooth. I ended up getting a small run in the paint in the sink, but I it not very noticeable and I think I am just going to leave it. All of the pieces look brand new and clean. I cant wait to see them installed. I still need to paint the endcap the same color.

No more APB!

Airstream Pattern Baldness - A.P.B. I just could not wait any longer. A few months ago Vintage Trailer Supply had a sale on the dual Cyclo and the supplies that I would need to polish the Airstream. I was in the process of changing the running lights over to new LED's and I thought this would be a perfect time to test the Nuvite polishing compound and my new Cyclo. I have not stripped the trailer of the clear coat that was installed in 78. Most of the clear coat was gone on the endcaps already, so I just used some lacquer thinner to get rid of the rest of it. It takes some time to get used to the process, but it really was not as bad as I had envisioned. It took a few hours to do 80% of the front Endcap. I will admit that I did not do a very good job, but dont really care. This is just a trial and I will have to go back later and do a proper job. It makes a world of difference. I can't wait to have the whole thing shiny.

New Plumbing and valves

Tonight I stayed late and hooked up the plumbing for the grey and black water tanks. Not too difficult here. I purchased new Valterra valves and all new 3" PVC piping. The old Thetford valves were glued to the pipes and I figured that it was just as easy to make all new fittings. It is just a matter of putting the parts together. I dry fitted the parts first then glued the PVC fittings. It all seems pretty good. I am hoping that I will not have any leaks. I will have to pull the Airstream out of the warehouse to get it to a location where I have water. Cross your fingers!

It was a Fan-Tastic night

Tonight I decided to put one of the two new Fantastic fans in the roof. When I purchased the Airstream it has a leak in the roof vent at the front of the trailer. Originally there was a plastic insert on the lid that allowed light to come in the trailer. A branch fell on it, cracked it, and allowed water to get into the trailer. This resulted in me replacing the floor near the door and having to weld 4 new outriggers to the frame near the door. Since the old fan vent was broken and when you turned the fan on it was noisy, I decided long ago to replace it with a new fan. It seems that the fantastic vent fan is a top choice. The model I chose was the 6000. It has a powered lifter, rain sensor and temperature gauge. What I like about it, is that I can tow the Airstream down the road with the vents open and if it starts to rain, they will automatically shut. Another thing is that if we are camping and it starts to rain the they will shut and no water will pour through the roof. I purchased mine from Vintage Trailer Supply. It was a few dollars more, but the housing above the roof is grey to match the trailer and the interior trim piece is curved to match the curved roof in my trailer. The installation was fairly simple. On the inside, I had to remove the light cover, the light assembly and drill out 4 rivets that attached the ceiling to the vent. I took a putty knife and a hammer to the roof and sheered the rivet heads off with the putty knife. I cleaned up the old Vulkum with lacquer thinner and then enlarged the opening with some tin snips. The opening for the old fan was square, but had rounded corners. The Fantastic vent had square corners. I squared off the corners and fitted the fan in place. I then moved inside and squared off the opening in the ceiling for the interior trim piece. The old vent had 2 sets of 12v wires running to it. One set was for the lighting and the other set was for the electric fan. I used the blue fan wire and wired it to my new fan. Everything worked. I then went back up to the roof and attached the fan. It comes with a closed cell Styrofoam gasket. I then screwed the unit to the roof with the provided screws. After it was screwed down. I ran a bead of Vulkum around the edge and put a dab of vulkum on the top of each screw head. I still need to attach the the interior trim piece, but I am going to wait until the interior is painted. I also moved the 12v lighting wires to a new hole in the ceiling so I can put new lights in the future. As a side note, I used my forklift at work to get on top of the trailer. I put a skid on the forklift to give me a platform to sit on. It worked out great. Much easier than hanging onto a ladder and trying not to put pressure on the top of the aluminum skin.

I've got gas

I think we all know that I have gas, but what I meant to say was that I now got a new gasket on both the exterior door and the interior door. The old gasket on the exterior door did not come off very easy. Lacquer thinner does a good job of dissolving the old glue, but it took a lot of effort to get the gasket material and glue off. Since I could not remove the door and lay it horizontally, the thinner would just run down the door and not soak into the old glue and gasket. The windows were much easier, since I could remove them and lay them flat. After the door was cleaned up. I just had to put the new gasket on. This gasket, purchased from Out of doors Mart, had a peal and stick glue. I pulled off the red strip and ran the gasket all around the door. I trimmed it at the bottom and was done. This was much easier than the gasket on the windows because for them, I had to put glue on both the window and the gasket, wait 10 min and then install. I next turned to the foam gasket that goes around the screen door. Same process here. Cleaned up the old glue and used a peel and stick foam gasket to attach the new seal around the screen door. After this I decided to put some new screen material in the door. The old one was very worn and discollored. Fairly easy process here. Pulled out the cord that attached the screen to the door. One problem that I ran into was that the channel that the cord pushed into was smaller than the roller installation tool that I had. The door looks much better with the new screen material. I used the standard black plastic screen. I think it looks better and makes the windows look tinted.