Saturday, January 30, 2010

Worked in the trailer

Today I put the screen material back into the frames. It was so cold in the warehouse that I moved my sawhorses and work surface into the Airstream. The Airstream now has heat and I was glad that it was working. It was a nice 65 degrees in the camper and a cool 25 degrees in the warehouse. I chose the black fiberglass screen. I like the look of it and it makes the windows look tinted. I'm almost ready to prime the interior walls.

Friday, January 22, 2010

Fill the holes

Today I tore down the upper cabinet that was above the sink and contains the systems computer. As it turns out, the computer is not part of the upper cabinet. I secured it with a strap to the ceiling and drilled out all the rivets that held up the only remaining upper cabinet. I then removed the 2 plastic cabinets that were attached to the wall near the window, and the plastic spice rack that was next to it. I am close to paint, so I need to prep the interior. I have a bunch of holes in the ceiling and walls where the old cabinets were riveted to the interior skin. At first I was going to bondo the holes and then decided to just put a rivet in each hole. The interior skin has a bunch of rivets, so I figure that I would just put some more in. They look fine and after I paint, they will almost disappear and look perfectly normal in an Airstream. After I ran out of rivets I took out all the old window screens. The screen material is a tan color that looks old and crappy. I already replaced the screen material on the door. I took the screen material off and spray painted the frame with some aluminum color spray paint. When it dried, I thought it looked pretty good. I then took all the screens to the paint booth. I tried to clean the 2nd screen with lacquer thinner and it took off the tan paint. I then sanded the frame and it turned the same color as the painted screen. At this point, I deceided to sand all the paint off the frames and will leave the frames raw aluminum.

Saturday, January 2, 2010

Honey I "almost" blew up my boys!

I tried, but was unsuccessful. Maybe next time. Here is the story. First of all, if you are reading this blog, you probably know how cheap I am. I need a furnace for the cold days. First of all I need one this winter so I can work on the interior. I plumbed the system with propane and after I had the old furnace hooked up with gas and electric, I tried to fire it up. No luck. I could not get it to fire up. I then looked to the internet to give me some clues as to how to try and fix the furnace. Most people say to just scrap it and buy a new one. Since I don't expect to use the furnace very often I really dont want to spend much money to get it back in operation. I was told to pull the burner out and hacksaw the slots in the top open and that should fix my problem. I did just that, and put it back together and hooked it up. Guess what? It worked. It lit right up and I thought, "great I just saved myself $600" As you can see in the following picture you can see the blue flame. This is great! I decided to let the thing run for awhile so that it can get up to full tempeture. It shut off after about 5 minutes. I go over to the thermostat and shut it off and turn it back on. I then hear the furnace go "pop". I figure, that was interesting. I shut it off and do it again. I hear "POP". (that means a little louder) I do it again. "POP". The fourth time, it goes bang, and my ear start ringing. After I check myself for schrapnel, I decided not to try again. As you can see from the picture, the furnace blew out the sides of the burn chamber. I dedided at that point it was worth it to purchase a new furncace. I called Palamano RV in Florida and purchased a new one for around $350. If I knew that it was going to be around that price, I would not have hesitated and would have saved myself from death. I got the new one 2 days later and hooked it up. It works perfectly and now I have heat in the Airstream.

Friday, December 18, 2009

Shower goes in

Today I put the shower in. It has been painted for quite some time now, but I just did not have a chance to rivet it back in. I had to attach the pluming first. I bought a new shower valve from Home Depot and then used pex to secure the fittings in the back of the shower. I'm not sure how you would replace the shower valve if the tub was attached and the shower wall was riveted to the Airstream. Lets hope that it never needs to be replaced, or worse that it leaks on my new floor. I made the pex extra long so that I can hook it into the water system in the next week or so. I will finish the fresh water system before I put the tub in, because I can still get to the valve and all the fittings at this point. I don't want to button it up before I have a chance to pressure test the system.

Tuesday, November 24, 2009

Driver side started but I was froze out

I ran out of the F7 polish, so I had to buy some more. I decided to try the G6 polish in addition to the F7. The G6 is definitely more aggressive. I like it! It cuts much faster. I guess you live and learn. The G6 leaves a tremendous amount of swirl marks. They don't show up until you shine a light on it at an angle. I am now polishing in the warehouse because outside it is too cold and it gets dark too fast. The swirl marks come out easy with the F7 and the cyclo. I have about 3/4 of the street side compounded and one small section cycloed. It is getting too cold to polish at this point. It just is taking too long to get the metal up to temperature. What I have discovered is that you need to actually heat the metal up at some degree to get the metal to "melt" and bring out the shine. Here are some pictures of the swirl marks. See if you can find what section was cyloed. I'm done with polishing in 2009. I will have to wait till the spring to continue and finish up the shine.

Saturday, November 7, 2009

One side is close

I got to spend the day outside this Saturday. I think this will be the last time this year that the old Aluminum money pit will see the light of day till next spring. It was in the upper 50's and it felt even warmer in the sun. I finished polishing the curb side with the F7 Nuvite. It is now compounded and cycloed. I will finish with the final polish in the spring when it warms up a little.

Sunday, November 1, 2009

Still Polishing

Today I spend about 5 hours polishing. I have compounded and cycloed with F7. I now have about 1/4 of the trailer polished to F7. I have not cycloed wtih the S, but it still looks pretty good.